ALIYUN::VPC::RouterInterface_VPC_资源类型

ALIYUN::VPC::RouterInterface用于创建路由器接口。

语法

{
  "Type": "ALIYUN::VPC::RouterInterface",
  "Properties": {
    "OppositeRegionId": String,
    "Description": String,
    "HealthCheckSourceIp": String,
    "RouterType": String,
    "AccessPointId": String,
    "RouterId": String,
    "Role": String,
    "OppositeInterfaceOwnerId": String,
    "OppositeAccessPointId": String,
    "OppositeInterfaceId": String,
    "HealthCheckTargetIp": String,
    "OppositeRouterId": String,
    "Spec": String,
    "OppositeRouterType": String,
    "Name": String,
    "PricingCycle": String, 
    "Period": Number, 
    "AutoPay": Boolean, 
    "InstanceChargeType": String
  }
}

属性


属性名称	类型	必须	允许更新	描述	约束
RouterId	String	是	否	路由器ID。	无
Role	String	是	否	连接中扮演的角色。即，是连接发起端还是连接接受端。	取值： InitiatingSide RouterType取值为VBR时，该参数取值必须为InitiatingSide。 AcceptingSide OppositeRouterType取值为VBR时，该参数取值必须为AcceptingSide。
RouterType	String	否	否	所属的路由器类型。	取值： VRouter VBR
AccessPointId	String	否	否	所属的接入点ID。	RouterType取值为VBR时该参数必须指定，而且创建后不允许修改。在RouterType取值为VRouter时，不能指定该参数。
Spec	String	否	否	路由器接口的规格。	可用的规格和对应的带宽如下： Mini.2：2Mbps Mini.5：5Mbps Small.1：10Mbps Small.2：20Mbps Small.5：50Mbps Middle.1：100Mbps Middle.2：200Mbps Middle.5：500Mbps Large.1：1000 Mbps Large.2：2000Mbps Large.5：5000 Mbps Xlarge.1：10000Mbps Role取值为InitiatingSide时，该参数必须指定。 Role参数取值为AcceptingSide时，该参数取值默认为Negative。
OppositeRegionId	String	否	否	要连接的对端所在的地域。	无
OppositeInterfaceOwnerId	String	否	否	连接对端路由器接口的持有者账号ID。	默认是当前用户的ID。
OppositeInterfaceId	String	否	否	对端路由器接口ID。	无
OppositeRouterId	String	否	否	要连接的对端的路由器的ID。	无
OppositeRouterType	String	否	否	要连接的对端路由器接口所属的路由器类型。	取值： VRouter VBR RouterType取值为VBR时，该参数取值必须是VRouter。
OppositeAccessPointId	String	否	否	对端所属的接入点ID。	OppositeRouterType取值为VBR时该参数必须指定，而且创建后不允许修改。 OppositeRouterType取值为VRouter时，不能指定该参数。说明 OppositeRouterType取值为VBR时OppositeRouterId所指定的VBR必须在OppositeAccessPointId所指定的接入点内。
Description	String	否	否	路由器接口描述。	长度为2~256个字符。不能以`http://`和`https://`开头。不填则为空，默认为空。
Name	String	否	否	路由器接口显示名称。	长度为2~128个字符。必须以英文字母或汉字开头，不能以`http://`和`https://`开头。可包含英文字母、汉字、数字、英文句点（.）、下划线（_）和短划线（-）。
HealthCheckSourceIp	String	否	否	专线容灾和ECMP场景下用来做专线健康检查的Packet的源IP。	只对本端是VRouter，而且对端是VB的路由器接口有效。必须是本端VRouter所在的VPC内的一个未被使用的IP。HealthCheckSourceIp与HealthCheckTargetIp必须同时指定，或同时不指定。
HealthCheckTargetIp	String	否	否	专线容灾和ECMP场景下用来做专线健康检查的Packet的目标IP。	只对本端是VRouter，而且对端是VBR的路由器接口有效。通常可以用专线用户端CPE的IP（即对端RI所在的VBR上的PeerGatewayIp），也可以指定专线用户端的其他IP。HealthCheckSourceIp与HealthCheckTargetIp必须同时指定，或同时不指定。
PricingCycle	String	否	否	预付费的计费周期。	取值： Month：按月付费。 Year：按年付费。
Period	Number	否	否	购买时长。	取值：当选择按月付费时，取值范围为1~9。当选择按年付费时，取值范围为1~3。
AutoPay	Boolean	否	否	自动付款。	取值： true false（默认值）
InstanceChargeType	String	否	否	实例的付费类型。	取值： Postpaid：后付费（按量付费）。 Prepaid：预付费（包年包月）。

返回值

Fn::GetAtt

RouterInterfaceId：路由器接口ID。

示例

JSON格式

{
  "ROSTemplateFormatVersion": "2015-09-01",
  "Parameters": {
    "OppositeInterfaceId": {
      "Type": "String",
      "Description": "The ID of the peer router interface."
    },
    "OppositeInterfaceOwnerId": {
      "Type": "String",
      "Description": "Owner account ID of the connection peer RouterInterface. The default value is current user Id."
    },
    "Description": {
      "Type": "String",
      "Description": "Custom description of the RouterInterface, [2, 256] characters. Don't fill or empty, the default is empty."
    },
    "OppositeRouterId": {
      "Type": "String",
      "Description": "The router ID of the connection peer RouterInterface."
    },
    "OppositeRegionId": {
      "Type": "String",
      "Description": "The region where the connection peer RouterInterface locates. The default value is region where stack is created."
    },
    "PricingCycle": {
      "Type": "String",
      "Description": "Unit of the payment cycle. It could be Month (default) or Year.",
      "AllowedValues": [
        "Month",
        "Year"
      ]
    },
    "InstanceChargeType": {
      "Type": "String",
      "Description": "The billing method of the router interface. Valid values: PrePaid (Subscription), PostPaid (default, Pay-As-You-Go)",
      "AllowedValues": [
        "PrePaid",
        "PostPaid"
      ],
      "Default": "PostPaid"
    },
    "HealthCheckSourceIp": {
      "Type": "String",
      "Description": "Source IP address of the packet for leased line HealthCheck in leased line disaster tolerance and ECMP scenarios. It is valid only for a VRouter RouterInterface with a peer on a VBR. The source IP address must be in the VPC of the local VRouter and is not used. HealthCheckSourceIp and HealthCheckTargetIp parameters must be both specified or left unspecified."
    },
    "Period": {
      "Type": "Number",
      "Description": "Prepaid time period. It could be from 1 to 9 when PricingCycle is Month, or 1 to 3 when PricingCycle is Year. Default value is 3.",
      "AllowedValues": [
        1,
        2,
        3,
        4,
        5,
        6,
        7,
        8,
        9
      ]
    },
    "RouterId": {
      "Type": "String",
      "Description": "The router ID to create RouterInterface."
    },
    "AutoPay": {
      "Type": "Boolean",
      "Description": "Indicates whether automatic payment is enabled. Valid values:false: Automatic payment is disabled. You need to go to Orders to make the payment once an order is generated. true: Automatic payment is enabled. The payment is automatically made.",
      "AllowedValues": [
        "True",
        "true",
        "False",
        "false"
      ]
    },
    "Name": {
      "Type": "String",
      "Description": "Custom name of the RouterInterface, [2, 128] English or Chinese characters, must start with a letter or Chinese in size, can contain numbers, '_' or '.', '-'"
    },
    "Role": {
      "Type": "String",
      "Description": "RouterInterface role. Now support 'InitiatingSide|AcceptingSide'. If 'RouterType' is specified as 'VBR', the value must be 'InitiatingSide'.If 'OppositeRouterType' is specified as 'VBR', the value must be 'AcceptingSide'.",
      "AllowedValues": [
        "InitiatingSide",
        "AcceptingSide"
      ]
    },
    "OppositeRouterType": {
      "Type": "String",
      "Description": "Router type of the connection peer router. Now support 'VRouter|VBR'. If 'RouterType' is specified as 'VBR', the value must be 'VRouter'.",
      "AllowedValues": [
        "VRouter",
        "VBR"
      ],
      "Default": "VRouter"
    },
    "RouterType": {
      "Type": "String",
      "Description": "Router type. Now support 'VRouter|VBR'",
      "AllowedValues": [
        "VRouter",
        "VBR"
      ],
      "Default": "VRouter"
    },
    "AccessPointId": {
      "Type": "String",
      "Description": "Access point ID. If 'RouterType' is specified as 'VBR', the value is required."
    },
    "OppositeAccessPointId": {
      "Type": "String",
      "Description": "Access point ID of the connection peer RouterInterface. If 'OppositeRouterType' is specified as 'VBR', the value is required."
    },
    "Spec": {
      "Type": "String",
      "Description": "RouterInterface specification. If 'Role' is specified as 'InitiatingSide', the value is required. If 'Role' is specified as 'AcceptingSide', the value is set as 'Negative' by default."
    },
    "HealthCheckTargetIp": {
      "Type": "String",
      "Description": "Target IP address of the packet for leased line HealthCheck in leased line disaster tolerance and ECMP scenarios. It is valid only for a VRouter RouterInterface with a peer on a VBR. Usually you can use the CPE IP address of the leased line user's client (that is, the PeerGatewayIP on the VBR of the peer RouterInterface), you can also specify another IP address of the leased line user's client as the HealthCheck target IP address. HealthCheckSourceIp and HealthCheckTargetIp parameters must be both specified or left unspecified."
    }
  },
  "Resources": {
    "RouterInterface": {
      "Type": "ALIYUN::VPC::RouterInterface",
      "Properties": {
        "OppositeInterfaceId": {
          "Ref": "OppositeInterfaceId"
        },
        "OppositeInterfaceOwnerId": {
          "Ref": "OppositeInterfaceOwnerId"
        },
        "Description": {
          "Ref": "Description"
        },
        "OppositeRouterId": {
          "Ref": "OppositeRouterId"
        },
        "OppositeRegionId": {
          "Ref": "OppositeRegionId"
        },
        "PricingCycle": {
          "Ref": "PricingCycle"
        },
        "InstanceChargeType": {
          "Ref": "InstanceChargeType"
        },
        "HealthCheckSourceIp": {
          "Ref": "HealthCheckSourceIp"
        },
        "Period": {
          "Ref": "Period"
        },
        "RouterId": {
          "Ref": "RouterId"
        },
        "AutoPay": {
          "Ref": "AutoPay"
        },
        "Name": {
          "Ref": "Name"
        },
        "Role": {
          "Ref": "Role"
        },
        "OppositeRouterType": {
          "Ref": "OppositeRouterType"
        },
        "RouterType": {
          "Ref": "RouterType"
        },
        "AccessPointId": {
          "Ref": "AccessPointId"
        },
        "OppositeAccessPointId": {
          "Ref": "OppositeAccessPointId"
        },
        "Spec": {
          "Ref": "Spec"
        },
        "HealthCheckTargetIp": {
          "Ref": "HealthCheckTargetIp"
        }
      }
    }
  },
  "Outputs": {
    "RouterInterfaceId": {
      "Description": "The ID of created RouterInterface.",
      "Value": {
        "Fn::GetAtt": [
          "RouterInterface",
          "RouterInterfaceId"
        ]
      }
    }
  }
}

YAML格式

ROSTemplateFormatVersion: '2015-09-01'
Parameters:
  OppositeInterfaceId:
    Type: String
    Description: The ID of the peer router interface.
  OppositeInterfaceOwnerId:
    Type: String
    Description: >-
      Owner account ID of the connection peer RouterInterface. The default value
      is current user Id.
  Description:
    Type: String
    Description: >-
      Custom description of the RouterInterface, [2, 256] characters. Don't fill
      or empty, the default is empty.
  OppositeRouterId:
    Type: String
    Description: The router ID of the connection peer RouterInterface.
  OppositeRegionId:
    Type: String
    Description: >-
      The region where the connection peer RouterInterface locates. The default
      value is region where stack is created.
  PricingCycle:
    Type: String
    Description: Unit of the payment cycle. It could be Month (default) or Year.
    AllowedValues:
      - Month
      - Year
  InstanceChargeType:
    Type: String
    Description: >-
      The billing method of the router interface. Valid values: PrePaid
      (Subscription), PostPaid (default, Pay-As-You-Go)
    AllowedValues:
      - PrePaid
      - PostPaid
    Default: PostPaid
  HealthCheckSourceIp:
    Type: String
    Description: >-
      Source IP address of the packet for leased line HealthCheck in leased line
      disaster tolerance and ECMP scenarios. It is valid only for a VRouter
      RouterInterface with a peer on a VBR. The source IP address must be in the
      VPC of the local VRouter and is not used. HealthCheckSourceIp and
      HealthCheckTargetIp parameters must be both specified or left unspecified.
  Period:
    Type: Number
    Description: >-
      Prepaid time period. It could be from 1 to 9 when PricingCycle is Month,
      or 1 to 3 when PricingCycle is Year. Default value is 3.
    AllowedValues:
      - 1
      - 2
      - 3
      - 4
      - 5
      - 6
      - 7
      - 8
      - 9
  RouterId:
    Type: String
    Description: The router ID to create RouterInterface.
  AutoPay:
    Type: Boolean
    Description: >-
      Indicates whether automatic payment is enabled. Valid values:false:
      Automatic payment is disabled. You need to go to Orders to make the
      payment once an order is generated. true: Automatic payment is enabled.
      The payment is automatically made.
    AllowedValues:
      - 'True'
      - 'true'
      - 'False'
      - 'false'
  Name:
    Type: String
    Description: >-
      Custom name of the RouterInterface, [2, 128] English or Chinese
      characters, must start with a letter or Chinese in size, can contain
      numbers, '_' or '.', '-'
  Role:
    Type: String
    Description: >-
      RouterInterface role. Now support 'InitiatingSide|AcceptingSide'. If
      'RouterType' is specified as 'VBR', the value must be 'InitiatingSide'.If
      'OppositeRouterType' is specified as 'VBR', the value must be
      'AcceptingSide'.
    AllowedValues:
      - InitiatingSide
      - AcceptingSide
  OppositeRouterType:
    Type: String
    Description: >-
      Router type of the connection peer router. Now support 'VRouter|VBR'. If
      'RouterType' is specified as 'VBR', the value must be 'VRouter'.
    AllowedValues:
      - VRouter
      - VBR
    Default: VRouter
  RouterType:
    Type: String
    Description: Router type. Now support 'VRouter|VBR'
    AllowedValues:
      - VRouter
      - VBR
    Default: VRouter
  AccessPointId:
    Type: String
    Description: >-
      Access point ID. If 'RouterType' is specified as 'VBR', the value is
      required.
  OppositeAccessPointId:
    Type: String
    Description: >-
      Access point ID of the connection peer RouterInterface. If
      'OppositeRouterType' is specified as 'VBR', the value is required.
  Spec:
    Type: String
    Description: >-
      RouterInterface specification. If 'Role' is specified as 'InitiatingSide',
      the value is required. If 'Role' is specified as 'AcceptingSide', the
      value is set as 'Negative' by default.
  HealthCheckTargetIp:
    Type: String
    Description: >-
      Target IP address of the packet for leased line HealthCheck in leased line
      disaster tolerance and ECMP scenarios. It is valid only for a VRouter
      RouterInterface with a peer on a VBR. Usually you can use the CPE IP
      address of the leased line user's client (that is, the PeerGatewayIP on
      the VBR of the peer RouterInterface), you can also specify another IP
      address of the leased line user's client as the HealthCheck target IP
      address. HealthCheckSourceIp and HealthCheckTargetIp parameters must be
      both specified or left unspecified.
Resources:
  RouterInterface:
    Type: 'ALIYUN::VPC::RouterInterface'
    Properties:
      OppositeInterfaceId:
        Ref: OppositeInterfaceId
      OppositeInterfaceOwnerId:
        Ref: OppositeInterfaceOwnerId
      Description:
        Ref: Description
      OppositeRouterId:
        Ref: OppositeRouterId
      OppositeRegionId:
        Ref: OppositeRegionId
      PricingCycle:
        Ref: PricingCycle
      InstanceChargeType:
        Ref: InstanceChargeType
      HealthCheckSourceIp:
        Ref: HealthCheckSourceIp
      Period:
        Ref: Period
      RouterId:
        Ref: RouterId
      AutoPay:
        Ref: AutoPay
      Name:
        Ref: Name
      Role:
        Ref: Role
      OppositeRouterType:
        Ref: OppositeRouterType
      RouterType:
        Ref: RouterType
      AccessPointId:
        Ref: AccessPointId
      OppositeAccessPointId:
        Ref: OppositeAccessPointId
      Spec:
        Ref: Spec
      HealthCheckTargetIp:
        Ref: HealthCheckTargetIp
Outputs:
  RouterInterfaceId:
    Description: The ID of created RouterInterface.
    Value:
      'Fn::GetAtt':
        - RouterInterface
        - RouterInterfaceId