文档

CreateRouteEntry - 创建自定义路由条目

更新时间:

调用CreateRouteEntry在VPC路由器或边界路由器(VBR)上创建自定义路由条目。

接口说明

  • CreateRouteEntry 接口属于异步接口,即系统会返回一个实例 ID,但该路由的添加尚未完成,系统后台的启动任务仍在进行。您可以调用 DescribeRouteEntryList 查询路由的添加状态:
    • 当路由处于 Creating 状态时,表示路由添加中。
    • 当路由处于 Created 状态时,表示路由添加完成。
  • CreateRouteEntry 接口不支持在同一个 VPC 或者同一个 VBR 中并发添加自定义路由条目。

使用该接口为 VPC 路由器的路由表添加自定义路由条目时,请注意以下事项:

说明 当添加的路由为前缀列表路由时,路由配额的计算为现存路由与前缀列表路由的最大路由条目数之和是否超过路由配额的限制。
  • 同一个路由表中自定义路由条目不能超过 200 条。

  • 自定义路由条目的目标网段(DestinationCidrBlock)不能和 VPC 内的交换机的网段相同,可以包含交换机的网段但是不能被交换机的网段包含。

  • 自定义路由条目的目标网段(DestinationCidrBlock)不能指向 100.64.0.0/10,也不能被 100.64.0.0/10 包含。

  • 同一路由表下的路由条目的目标网段(DestinationCidrBlock)不允许相同。

  • 如果指定的目标网段(DestinationCidrBlock)是一个 IP 地址,会按照 32 位掩码来处理。

  • 多条自定义路由条目可以指向同一个下一跳(NextHopId)。

  • 自定义路由条目的下一跳(NextHopId)必须和路由表在同一个 VPC。

  • 支持通过 NextHopList 参数配置 ECMP 路由:

    • 添加普通(非 ECMP)自定义路由时,需指定 DestinationCidrBlockNextHopTypeNextHopId 参数,且不能指定 NextHopList 参数。

    • 添加 ECMP 路由时,需指定 DestinationCidrBlockNextHopList 参数,且不能指定 NextHopTypeNextHopId 参数。

使用该接口为边界路由器的路由表添加自定义路由条目时,请注意以下事项:

  • 同一个路由表中自定义路由条目不能超过 200 条。

  • 不支持 NextHopList 参数。

  • 自定义路由条目的目标网段(DestinationCidrBlock)不能指向 100.64.0.0/10,也不能被 100.64.0.0/10 包含。

  • 同一路由表下的路由条目的目标网段(DestinationCidrBlock)不允许相同。

  • 如果指定的目标网段(DestinationCidrBlock)是一个 IP 地址,会按照 32 位掩码来处理。

  • 多条自定义路由条目可以指向同一个下一跳(NextHopId)。

  • 自定义路由条目的下一跳(NextHopId)必须是该 VBR 关联的路由器接口。

  • 只允许在 VBR 状态是 Active,而且对应的物理专线状态是 Enabled 且没有被欠费锁定的情况下在 VBR 上新建路由条目。

  • 仅支持添加普通路由(非 ECMP),需指定 DestinationCidrBlockNextHopTypeNextHopId 参数,且不能指定 NextHopList 参数。

调试

您可以在OpenAPI Explorer中直接运行该接口,免去您计算签名的困扰。运行成功后,OpenAPI Explorer可以自动生成SDK代码示例。

授权信息

下表是API对应的授权信息,可以在RAM权限策略语句的Action元素中使用,用来给RAM用户或RAM角色授予调用此API的权限。具体说明如下:

  • 操作:是指具体的权限点。
  • 访问级别:是指每个操作的访问级别,取值为写入(Write)、读取(Read)或列出(List)。
  • 资源类型:是指操作中支持授权的资源类型。具体说明如下:
    • 对于必选的资源类型,用背景高亮的方式表示。
    • 对于不支持资源级授权的操作,用全部资源表示。
  • 条件关键字:是指云产品自身定义的条件关键字。
  • 关联操作:是指成功执行操作所需要的其他权限。操作者必须同时具备关联操作的权限,操作才能成功。
操作访问级别资源类型条件关键字关联操作
vpc:CreateRouteEntryWrite
  • RouteTable
    acs:vpc:{#regionId}:{#accountId}:routetable/{#RouteTableId}

请求参数

名称类型必填描述示例值
RegionIdstring

路由表所属地域的 ID。

您可以通过调用 DescribeRegions 接口获取地域 ID。

cn-hangzhou
RouteTableIdstring

要添加自定义路由条目的路由表 ID。

vtb-bp145q7glnuzd****
DestinationCidrBlockstring

自定义路由条目的目标网段,支持 IPv4、IPv6 和前缀列表的目标网段。需满足以下要求:

  • 目标网段不能指向 100.64.0.0/10 或被 100.64.0.0/10 包含。

  • 同一张路由表内的不同路由条目的目标网段不能相同。

192.168.0.0/24
NextHopIdstring

自定义路由条目的下一跳实例的 ID。

i-j6c2fp57q8rr4jlu****
ClientTokenstring

客户端 Token,用于保证请求的幂等性。

从您的客户端生成一个参数值,请确保不同请求间该参数值唯一。ClientToken 只支持 ASCII 字符。

说明 若您未指定,则系统自动使用 API 请求的 RequestId 作为 ClientToken 标识。每次 API 请求的 RequestId 不一样。
02fb3da4-130e-11e9-8e44-001****
RouteEntryNamestring

要添加的自定义路由条目的名称。

名称长度为 1~128 个字符,不能以http://https://开头。

test
Descriptionstring

自定义路由条目的描述信息。

描述长度为 1~256 个字符,不能以http://https://开头。

test
NextHopTypestring

自定义路由条目的下一跳的类型,取值:

  • Instance(默认值):ECS 实例。

  • HaVip:高可用虚拟 IP。

  • RouterInterface:路由器接口。

  • NetworkInterface:弹性网卡。

  • VpnGateway:VPN 网关。

  • IPv6Gateway:IPv6 网关。

  • NatGateway:NAT 网关。

  • Attachment:转发路由器。

  • VpcPeer:VPC 对等连接。

  • Ipv4Gateway:IPv4 网关。

  • GatewayEndpoint:网关终端节点。

  • CenBasic:CEN 不支持转发路由器。

  • Ecr:专线网关。

RouterInterface
NextHopListobject []

下一跳的信息。

NextHopIdstring

ECMP 路由的下一跳实例的 ID。

ri-2zeo3xzyf3cd8r4****
Weightinteger

ECMP 路由的下一跳的路由权重。

10
NextHopTypestring

ECMP 路由的下一跳的类型,目前仅取值:RouterInterface(路由器接口)。

RouterInterface

返回参数

名称类型描述示例值
object

自定义路由条目的 ID。

RouteEntryIdstring

自定义路由条目的 ID。

rte-sn6vjkioxte1gz83z****
RequestIdstring

请求 ID。

0ED8D006-F706-4D23-88ED-E11ED28DCAC0

示例

正常返回示例

JSON格式

{
  "RouteEntryId": "rte-sn6vjkioxte1gz83z****",
  "RequestId": "0ED8D006-F706-4D23-88ED-E11ED28DCAC0"
}

错误码

HTTP status code错误码错误信息描述
400IllegalParam.CidrBlockThe specified CidrBlock is illegal.CidrBlock参数非法。
400QuotaExceededRoute entry quota exceeded in this route table.超过路由条目配额。
400MissingParameterMiss mandatory parameter.缺少必要参数,请您检查必填参数是否都已填后再进行操作。
400InvalidCidrBlock.MalformedSpecified CIDR block is not valid.该CIDR格式不正确。
400InvalidCIDRBlock.DuplicateSpecified CIDR block is already exists.该网段已经在该路由表中存在。
400IncorrectVpcStatusCurrent VPC status does not support this operation.当前VPC的状态无法支持这个操作。
400IncorrectInstanceStatusCurrent instance status does not support this operation.当前实例的状态不支持该操作。
400IncorrectRouteEntryStatusSome route entry status blocked this operation.无法执行该操作,当前路由表中有路由条目的状态为pending或modifying。
400IncorrectVSwitchStatusThe current virtual switch status does not support this operation.该vSwitch处于pending状态,无法删除。
400InvalidCidrBlockSpecified CIDR block is not valid.可能的报错原因:1.您不在10.0.0.0/8的路由网段的白名单中,不能使用该网段。2.添加的自定义路由目标网段不能从属于同一个VPC下面所有交换机的网段。3.网段不能是100.64.0.0/10。
400InvalidNextHopTypeSpecified parameter "NextHopType" is not valid该下一跳类型不合法。
400InvalidNextHop.NotFoundSpecified next hop does not exist.该下一跳地址不存在。
400InvalidVRouter.NotFoundvRouter not exists.路由器不存在,请您检查输入的路由器是否正确。
400InvalidVPC.NotFoundvpc not exists.专有网络不存在,请您检查输入的专有网络是否正确。
400InvalidNexthopTypeAndList.BothNullboth nexthopType and nextHopList are null.下一跳类型和下一跳列表都为空。
400InvalidNexthopTypeAndList.BothNotNullboth nexthopType and nextHopList are not null.下一跳类型和下一跳列表不能同时为空。
400InvalidRouterInterfaceinvalid router interface.该路由器接口不存在。
400InvalidOppositeRouterTypenexthop list cannot only contain router interface whose opposite router interface is on vbr.下一跳的路由器接口的对端路由器类型必须为边界路由器。
400InvalidNexthopListSizenexthop size is illegal. Must be between 2 and 4.必须指定2~4个路由器接口作为下一跳。
400InvalidEntryRuleQuota.NotFoundRoute entry quota rule not exists.路由条目配额规则不存在。
400Forbidden.CheckEntryRuleQuotaRoute entry quota rule check error.检查路由条目配额时发生了错误。
400InvalidVBRStatusinvalid virtual border router status.边界路由器状态不合法。
400InvalidPhysicalConnectionBusinessStatusinvalid physical connection business status.物理专线状态不合法。
400InvalidRouterTypeCannot specify nexthop list in vbr's route table.-
400IncorrectHaVipStatusThis operation is denied because satus of the specified HaVip is neither Available nor InUse.无法执行该操作,因为HaVip的状态是Available或InUse。
400CountLimitExceed.HaVipRouteEntryThe count of route entry to HaVip in one route table is exceeded.同路由表中指向HaVip的路由数超过限制。
400InvalidRouteEntry.DuplicateThe route entry already exist.指定的路由条目已存在。
400IncorrectRouteEntryStatusSpecified routeEntry status error.无法执行该操作,当前路由表中有路由条目的状态为pending或modifying。
400IncorrectRouteEntryStatusVBR has NotStable route entry.无法执行该操作,边界路由表中有路由条目的状态为pending或modifying。
400InvalidParamThe Ecmp routerEntry with router interfaces local vgw vip not match.路由条目与路由器接口本地视频网关VIP不匹配。
400INVALID_WEIGHT_PARAMSpecified value of weight invalid该权重不合法。
400FORBIDDEN_USE_VPC_AS_INTERNET_GATEWAYThe Specified CIDR must be in vpc CIDR.该网段必须是VPC网段的子集。
400InvalidNexthopThe Specified nexthop illegal.-
400INVALID_VPC_IDThe Specified VpcId not match.该VPC不存在,请您检查输入的VPC是否正确。
400InvalidRouteEntrySizeThe Specified routerEntry size not legal.等价路由需要选择2~4个路由器接口作为路由下一跳。
400TaskConflictThe operation is too frequent, please wait a moment and try again.操作过于频繁,请稍等一会再重试
400InvalidRouteEntrySpecified routeEntry not exist.该路由条目不存在。
400InvalidDestinationCidrBlockThe specified destinationCidrBlock must not included in black list cidr.-
400Forbidden.VRouterNotFoundSpecified virtual switch is not found during access authentication.在访问鉴权时未找到指定的虚拟交换机
400DefaultValidate.Errorvalidte fail.-
400Region.NotSupportThe specified region does not currently support nextHopType for networkInterface-
400OperationFailed.NotifyCenCreateFailed to notify cen when create route entry.-
400Forbidden.PrivateIpNotFoundPrivate ip address not exist.-
400OperationUnsupported.InactiveModeVpc multi scope route only support active standby.-
400InvalidRouteEntryName.MalformedSpecified RouteEntry name is not valid.无法修改,因为指定的路由条目名称无效
400IncorrectStatus.MultiScopeRiRouteEntryMultiScope ri status must not in idle.-
400OperationUnsupported.MoreThanOneVpnOrHavipMultiScope can not support more than one vpn/havip.-
400OperationUnsupported.EcmpRiTypeOrNumberEmcp entry not supported if vpc-vbr or vbr-vlan ri does not exist.-
400Duplicated.VpcNextHopRoute entry nexthop duplicate.下一个重复的路由条目。
400OperationUnsupported.SubRouteTableECMPVpc subRouteTable don't support ecmp or multiScope.-
400InvalidNexthop.NotFoundVRouterEntry nexthop does not exist.-
400IllegalParam.NextHopIdInstance not exists or not vpc vm.-
400InvalidVpnInstanceId.NotFound%s-
400OperationFailed.ScopeActiveRouteEntryType%s-
400OperationFailed.ScopeStandbyRouteEntryQuota%s-
400OperationFailed.ScopeActiveRouteEntryQuota%s-
400OperationUnsupported.ScopeInvalidRouteType%s-
400OperationFailed.EcmpInvalidRouterInterfaceOppositeType%s-
400OperationUnsupported.Ipv6EcmpRouteEntry%s-
400OperationUnsupported.Ipv6CidrBlock%s-
400OperationUnsupported.Ipv6ForVBR%s-
400QuotaExceeded.HaVipRouteEntryVpc havip route entry quota exceed.-
400InvalidNexthop.DirectEniThe direct Eni cannot be nexthop.直通Eni不能作为下一跳
400OperationFailed.InvalidNexthopvpc multi scope route must has a enable nexthop.-
400OperationFailed.NotifyCenDeleteFailed to notify cen when delete route entry.-
400InvalidNatGateway.NotFoundNatgateway not exist.-
400OperationFailed.CxpRouteExistCxp route alreay existed.-
400IncorrectStatus.RouteTableStatus%s-
400OperationFailed.GetEniInfoFailed to get networkInterface info.-
400QuotaExceeded.EcmpRouteEntryNextHopCount%s-
400OperationFailed.InvalidNextHopType%s-
400OperationUnsupported.InvalidRouterInterfaceTypeOnly vpc vbr interface support ecmp route.-
400InvalidHaVip.NotFoundThe specified HaVip does not exist in the specified region.-
400OperationFailed.MultiScopeTypeThe specified nexthop type is not support in multiScope.-
400OperationFailed.DistibuteLockDistibute lock fail.-
400QuotaExceeded.VpnRouteEntryVpn route entry quota exceeded.创建路由条目失败,因为vpn路由条目超出限制
400InvalidAttachment.NotFoundThe attachment is not found.Attachment不存在。
400OperationFailed.ActiveNetworkInterfaceNotFoundNo active network interface is found on the attachment.Attachment上不存在可用的弹性网卡。
400InvalidNetworkInterface.NotFoundThe network interface is not found on the attachment.Attachment上的弹性网卡不存在。
400OperationFailed.QueryAttachmentInfoFailed to query attachment information.查询Attachment信息失败。
400IllegalParam.AttachmentIdThe attachment is invalid.Attachment非法。
400OperationFailed.NotSupportIPV6The specified next hop does not support IPv6.指定的下一跳不支持IPv6功能。
400IncorrectStatus.Ipv6AddressThe IPv6 address of the specified next hop is being assigned or deleted.指定的下一跳的IPv6地址此时正在被创建或删除中。
400OperationUnsupported.Ipv6EntryOnPrimaryNetworkInterfaceYou cannot create IPv6 route entries on a primary network interface.不允许创建下一跳为主网卡的IPv6路由。
400OperationUnsupported.SpecifyIpOnIpv6EntryYou cannot specify the private IP address when you create IPv6 route entries.创建IPv6路由不允许指定private IP参数。
400OperationUnsupported.MutipleIpv6AddressYou cannot specify a next hop that has bound multiple IPv6 addresses.不允许指定绑定了多个IPV6地址的下一跳。
400OperationDenied.Ipv6EntryOnCustomTableYou cannot create any IPv6 route entry on a custom route table.不允许在自定义路由表上创建IPv6路由。
400OperationDenied.CloudBoxVbrEntryAllowedInCustomRouteTableThe operation is not allowed because only the custom routing table can add a routing entry with the next hop pointing to the cloud box type VBR.指定操作被禁止,因为只有自定义路由表能够添加下一跳指向云盒类型VBR的路由条目。
400OperationDenied.RouteTableAssociateNotCloudBoxVSwitchThe operation is not allowed because of the routing table is bound to a non-cloud box type vswitch, and routing entries pointing to the cloud box VBR cannot be added.指定操作被禁止,因为路由表绑定到了非云盒类型的vSwitch上,不能添加指向云盒VBR的路由条目。
400OperationDenied.VbrMisMatchCloudBoxThe operation is not allowed because the routing table is bound to a cloud box vswitch, and routing entries pointing to other cloud box VBRs cannot be added.指定操作被禁止,因为路由表绑定到了一个云盒vSwitch上,不能添加指向其他云盒VBR的路由条目。
400OperationDenied.VbrIdleThe operation is not allowed because the next hop of the added routing entry is a VBR type RI at the opposite end, which cannot be in an idle state.指定操作被禁止,因为添加的路由条目下一跳是对端为VBR类型的RI,不能处于空闲状态。
400OperationDenied.RouterInterfaceToDifferentVpcThe operation is not allowed because the router interface is connected to different VPCs.指定操作被禁止,因为路由器接口指向不同的VPC。
400OperationDenied.RouterInterfaceFromDifferentZonesThe operation is not allowed because the router interface resides in different zones.指定操作被禁止,因为路由器接口来自不同的可用区。
400OperationFailed.PconnTrafficNotEnableThe operation is failed because of PconnTrafficNotEnable.操作失败,因为出方向流量未开通。
400ResourceNotFound.VpcPeerThe specified resource of %s is not found.无法找到指定的VpcPeer
400IncorrectStatus.VpcPeerThe status of %s [%s] is incorrect.%s[%s]的状态不正确。
400OperationDenied.RouteTableTypeNotPermittedThe operation is not allowed because the type of route table is not permitted.指定路由表类型不允许创建路由条目
400OperationDenied.GatewayRouteTableNotPermittedThe operation is not allowed to create a route pointing to this nextHop type on gateway route table.网关路由表中不支持创建指向此实例类型的路由条目。
400UnsupportedFeature.VpcPeerIpv6IPv6 route entries for VPC peering connections cannot be created in this region.此路由器接口对端是VPC,此地域不支持创建此类型下一跳的IPV6路由。
400OperationDenied.VpcIpv6NotEnabledIPv6 has not been enabled for the VPC.由于该VPC未使能IPV6能力,操作被拒绝。
400IncorrectStatus.Ipv4GatewayThe status of Ipv4Gateway is incorrect.Ipv4Gateway状态处于非稳态
400ResourceNotFound.PrefixListThe specified resource of prefixList is not found.输入的prefixList不存在
400UnsupportedFeature.CreatePrefixListEcmpRouteEntryThe feature of creating ecmp route entry with prefixList is not supported.目前不支持使用前缀列表创建Ecmp路由。
400OperationDenied.RouterInterfaceIpv6NotEnabledRouterinterface does not support IPv6.routerinterface不支持ipv6
400OperationDenied.NextHopTypeNotPermittedThe operation is not allowed because the nextHop type is invalid.不允许创建下一跳为此类型的路由。
400ResourceAlreadyAssociated.PrefixListThe operation failed because the specified prefixList route entry already exists.操作失败,此前缀列表路由存在。
400OperationFailed.CidrConflictWithPrefixListThe specified CIDR block already exists in a prefixList route entry.路由Cidr与已存在的前缀列表路由冲突。
400ResourceNotFound.Ipv4GatewaySpecified Ipv4Gateway does not exist.传入的IPv4网关实例不存在。
400Mismatch.HaVipIdAndRouteTableIdThe HaVip and RouteTable are mismatched.传入的高可用虚拟IP与路由表不属于同一个VPC。
400OperationFailed.OperationLockedThe operation failed because the nextHop instance is in the O&M lock state.路由下一跳实例处于运维锁定状态,无法操作。
400Mismatch.Ipv4GatewayIdAndRouteTableIdThe specified IPv4Gateway and RouteTable are not matched.操作失败,传入的IPv4网关和路由表不属于同一VPC。
400OperationUnsupported.DestinationCidrBlockOverlapWithVSwitchThe destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment.路由条目中指定的目标IPv6网段与vSwitch网段重叠。
400ResourceNotAssociated.CenThe Vpc and Cen are not associated.操作失败,本VPC未关联到此CEN中。
400IncorrectStatus.CenRelationThe status of Vpc in Cen is incorrect.操作失败,VPC在CEN中状态未达稳态。
400OperationDenied.CenTypeInvalidThe operation is not allowed because of Cen type is invalid..不支持在路由表中创建路由指向此类型的Cen。
400ResourceNotFound.CenThe specified resource of Cen is not found.操作失败,传入Cen资源不存在。
400ResourceNotFound.NetworkInterfaceThe specified resource of network interface is not found.指定的网卡不存在。
400RouteConflict.AlreadyExistRoute conflict exists in routing table.路由表中存在路由冲突。
403IncorrectInstanceStatusThe current status of the resource does not support this operation.当前资源的状态不支持该操作。
404InvalidParameterInstance not exists or not vpc vm-
404InvalidNatGatewayId.NotFoundSpecified value of NatGatewayId is not found in our record.-
404InvalidInstanId.NotFoundSpecified instance does not exist.指定的实例不存在,请您检查该实例是否正确。
404InvalidNextHopId.NotFoundSpecified next hop does not exist.该下一跳不存在。
404InvalidRouteTableId.NotFoundSpecified route table does not exist.该路由表不存在。
404InvalidHaVipId.NotFoundThe specified HaVip does not exist in the specified VPC.该HaVip在VPC中不存在。
404InvalidNetworkInterface.NotFoundThe specified networkInterface does not exist.-
404InvalidVpc.NotFoundSpecified vpc is not found in our record.-
404OperationFailed.InstanceDismatchCurrentVpcThe specified instance does not exist in current vpc.当前vpc中不存在指定的实例。
404InvalidIpv6Gateway.NotFoundSpecified Ipv6Gateway does not exist.-
500VPC.ERRORerror code 500,Internal server error.-
500InternalErrorThe request processing has failed due to some unknown error, exception or failure.内部错误

访问错误中心查看更多错误码。

变更历史

变更时间变更内容概要操作
2024-01-04OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-09-25OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-09-01OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-07-25OpenAPI 描述信息更新、OpenAPI 错误码发生变更看变更集
变更项变更内容
API 描述OpenAPI 描述信息更新
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-06-25OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-06-21OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-06-16OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-06-09OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-06-07OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-06-06OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-05-05OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-05-04OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-04-04OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
2023-03-07OpenAPI 错误码发生变更看变更集
变更项变更内容
错误码OpenAPI 错误码发生变更
    错误码 400 变更
    删除错误码:403
    删除错误码:404
    删除错误码:500
  • 本页导读 (1)
文档反馈